Publicidad
Idiomas disponibles
Idiomas disponibles
142. Magnetically Activated Lamp and Electronic Game sound
Connect points A and B using a 3-snap connector
. Place the magnet near the reed
3
switch
. The lamp
comes on and sound is produced.
13
18
143. Magnetically activated Lamp and Light Machine Gun Sound
Connect points CD and FH using a 3-snap connector
, a 2-snap connector
3
1-snap connector
. Place the magnet near the reed switch
. The lamp
1
13
and sound is produced at the same time.
144. Magnetically Activated Lamp and Heavy Machine Gun Sound
Connect points F and H using a 2-snap connector
and a 1-snap connector
2
the magnet near the reed switch
. The lamp
comes on and sound is produced.
13
18
145. Magnetically Activated Lamp and Crash Noise
Connect points FH and BG using two 2-snap connectors
and two 1-snap connectors
2
, Place the magnet near the reed switch
. The lamp
comes on and sound is pro-
1
13
18
duced.
146. Magnetically Activated Lamp and Laughing Sound
Connect points CD and BF using two 3-snap connectors
and two 1-snap connectors
3
. Place the magnet near the reed switch
. The lamp
comes on and sound is pro-
1
13
18
duced.
147. Light Activated Light Machine Gun Sound
Replace the lamp
18
with the photosensor
16
. Connect points CD and FH using a 3-snap
connector
3
, a 2-snap connector
2
and a 1-snap connectors
1
. Place the magnet near
the reed switch
and at the same time expose the photosensor
13
16
comes out of the buzzer
. If the light is not strong enough, no sound is produced.
11
148. Light Activated Heavy Machine Gun Sound
Connect points F and H using a 2-snap connector
2
and a 1-snap connector
the magnet near the reed switch
13
and at the same time expose the photosensor
to light. Sound comes out of the buzzer
11
. If the light is blocked, no sound is produced.
149. Light Activated Crash Noise
Connect points FH and BG using two 2-snap connectors
2
and two 1-snap connectors
1
. Place the magnet near the reed switch
13
and at the same time expose the photo-
sensor
16
to light. Sound comes out of the buzzer
11
. If the light is blocked, no sound is
produced.
150. Light Activated Laughing Sound
Connect points CD and BF using two 3-snap connectors
3
and two 1-snap connectors
1
. Place the magnet near the reed switch
13
and at the same time expose the photo-
sensor
16
to light. Sound comes out of the buzzer
11
. If the light is blocked, no sound is
produced.
90
151. Switch Activated Music, Lamp and LED
and a
2
comes on
18
Assemble as illustrated. Turn on and off the slide switch
alternately. The lamp
and the LED
light up at the same time and the music
18
17
begins.
152. Magnetically Activated Music, Lamp and LED
. Place
1
Replace the button switch
with the reed switch
14
switch
and the reed switch
alternately. The lamp
15
13
and the music begins.
153. Light Activated Music, Lamp and LED
Replace the button switch
with the photosensor
14
switch
and the photosensor
alternately.The lamp
15
16
and the music begins.
154. Touch Activated music, Lamp and LED
Replace the button switch
with the touch plate
14
switch
and the touch plate
alternately. The lamp
15
12
and the music begins.
155. Switch Activated Music and LED
to light. Sound
Remove the bulb. Follow the instructions for No. 151. The music plays louder than
before.
156. Magnetically Activated Music and LED
1
. Place
Remove the bulb. Follow the instructions for No. 152. The music plays louder than
16
before.
157. Light Activated Music and LED
Remove the bulb. Follow the instructions for No. 153. The music plays louder than
before.
158. Touch Activated Music and LED
Remove the bulb. Follow the instructions for No. 154. The music plays louder than
before.
and the button switch
15
14
. Turn on and off the slide
13
and the LED
light up
18
17
. Turn on and off the slide
16
and the LED
light up
18
17
. Turn on and off the slide
12
and the LED
light up,
18
17
91
Publicidad
