Scan Mode - LaserLiner BeamControl-Master Manual Del Usuario

Operation
Switch on BCM:
Hold the key „On/Off" pressed for 1 second, the head of BCM starts
rotating, the rotation mode is activated.
1. Spot mode:
The rotation laser sends out a laser beam
exactly to thans ofe point over a great
distance. In order to get into the spot mode
reduce the speed by me to zero.
Change position
on rotation laser
with SensoCommander

2. Scan mode:

A light-intensive segment of different breadth
and position can be adjusted.
Activate mode
on rotation laser
with SensoCommander
Change position
on rotation laser
with SensoCommander
BeamControl-Master BeamControl-Master
.
Change scan angle
on rotation laser
with SensoCommander
17
EN