Installation Instructions; Installation In A Double-Hung Sash Window - Daitsu APD12-AN Manual De Usuario

INSTALLATION INSTRUCTIONS

Installation in a double-hung sash window

26.5" ~ 48"
Window stool
Window stool
Foam seal
47
1. Cut the foam seal (adhesive type) to the proper length
Foam seal A and attach it to the window stool. Fig.10.
(adhesive type)
2. Attach the window slider kit to the window stool. Adjust
the length of the window slider kit according to the width
of window, shorten the adjustable window kit if the width
of window is less than 27 inches.
Open the window sash and place the window slider kit on
the window stool. Fig.11.
Fig. 10
3. Cut the foam seal (adhesive type) to the proper length
and attach it on the top of the window. Shown as in
Fig.12.
4. Close the window sash securely against the window.
Window kit
5. Cut the foam seal to an appropriate length and seal
the open gap between the top window sash and outer
window sash. Shown as in Fig.13.
Fig. 11
Window kit
Fig. 12
Fig. 13