Water Drainage - Daitsu APD12-AN Manual De Usuario

Water drainage

Fig. 23
Continuous drain hose
Fig. 24
Fig. 25
- During dehumidifying modes, remove the drain plug
from the back of the unit, install the drain connector
(5/8 universal female mender) with 3/4 hose (locally
Remove the drain plug
purchased). For the models without drain connector, just
attach the drain hose to the hole. Place the open end of
the hose directly over the drain area in your basement
floor. Please refer to Fig.23-24
.
- When the water level of the bottom tray reaches a
predetermined level, the unit beeps 8 times, the digital
display area shows "P1". At this time the air conditioning/
dehumidification process will immediately stop. However,
the fan motor will continue to operate (this is normal).
Carefully move the unit to a drain location, remove the
bottom drain plug and let the water drain away (Fig.25).
Restart the machine until the "P1" symbol disappears. If
the error repeats, call for service.
50