4. Use/Operators
4.1 Proper use
The electro cylinder is to be used exclusively for adjusting guided components or other adjust-
ment tasks of a comparable kind. Catalogue information, the contents of these assembly instruc-
tions and/or conditions laid down in the order are to be taken into account.
The values given in these assembly instructions are maximum values and must not be exceeded.
Any use beyond this is termed as non-intended. Improper use voids the liability of RK Rose+Krie-
ger GmbH as well as the general operating permission for this electric cylinder.
4.1.1 Reasonably predictable improper use
•
Overloading the appliance by exceeding the weight or ED
•
Use in the open air
•
Use in an environment with air humidity > dewpoint
•
Use in room with an explosive atmosphere as defined in the ATEX directive
•
Opening the appliance
•
Use with damaged feed lines or housing
•
inadequate securing of the electro cylinder
•
Use where there is direct contact with foodstuffs, pharmaceutical or cosmetic products.
•
Use in a heavily contaminated environment
•
Use in extremely dusty atmospheres
•
Use in an atmosphere containing solvents
•
Processing of living organisms
A potential malfunction of the limit switch is to be prevented by its design. Lateral forces must not
lead to toppling. No risk must arise if the mains plug is pulled out.
4.2 Who can use, install and operate this electro cylinder
Individuals who have read and understood the assembly instructions completely can use, install
and operate this electro cylinder. Responsibilities for handling this electro cylinder must be clearly
laid down and obeyed.
44