Product Information; How It Works; Versions - Phoenix Mecano RK Rose+Krieger LZ 80 Instrucciones De Montaje

6.1 How it works

The LZ 80 electro cylinder is used to adjust controlled components or other adjustment tasks of a
comparable kind. The cylinder is driven at the customer's discretion by a low voltage motor, an
AC motor or a servomotor.

6.1.1 Versions

The electro cylinder is available in various versions. The versions differ in design and mechanical
construction (see technical specification in section 6.2).
LZ 80 parallel form
with 24V DC drive motor arranged parallel to the push rod
LZ 80 PL/FL
without motor
LZ 80 PL/FL
with AC or servo motor placed directly on the guidance section
•
After receiving this electro cylinder, check the device for possible damage and missing com-
ponents.
•
Notify RK Rose+Krieger GmbH of any faults found immediately.

6. Product information

47