Descargar Imprimir esta página

Important - Canon PIXMA MP600R Guía De Iniciación Rápida

Ocultar thumbs Ver también para PIXMA MP600R:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
5
Remove the new ink tank from its packaging,
then pull the orange tape in the direction of
the arrow (A) so that the protective film does
not remain on the air hole (B). Then remove
the film completely (C).
6
Remove the orange protective cap (A) from
the bottom of the ink tank.
Carefully hold the protective cap when removing it
to prevent the ink from staining your fingers.
Discard the cap once it is removed.

Important

Do not touch the electrical contacts (B) on the ink tank.
Doing so can cause the machine to malfunction or
become unable to print.
7
Insert the front end of the ink tank into the
Print Head.
Make sure the position of the tank matches the
label (A).
8
Press on the
the ink tank snaps firmly into place.
Confirm that the ink lamp (A) lights up red.
26
Replacing an Ink Tank
mark on the ink tank until
(C)
(A)
(A)
(A)
(B)
(B)
(A)

Publicidad

loading