Temperature Alarm - Le Chai LMV1500 Instrucciones De Uso

ºF/ºC SELECTOR
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit.
Setting the Temperature Control
The unit has a single adjustable temperature zone. The temperature can be set between 5ºC
and 20ºC (41ºF and 68ºF). It can be used as a wine maturing cabinet or a wine serving cabinet.
The recommended temperature setting range for maturing wine is between 11ºC and 14ºC
(52ºF and 57ºF). The recommended temperature setting range for serving white wine is
between 5ºC and 10ºC (41ºF and 50ºF) and the recommended temperature setting range for
serving red wine is between 15ºC and 20ºC (58ºF and 68ºF).
When the unit is plugged in for the first time, the unit will power up automatically to the preset
defaults. The temperature preset at the factory is 12°C (54ºF) (ideal maturing temperature).
Press the until the temperature you want to set is flashing. Then you can use the and
keys to set the internal temperature as required. When you press either key at the first time,
the display will show the last temperature set previously.
The temperature will increase 1°C/1ºF if you press the key once, or the temperature will
decrease 1°C/1ºF if you press the key once. The display flashes while you make the setting.
The set temperature will temporarily flash in the display for 5 seconds after the temperature has
been set. Then the display shows the current inner temperature again.
To view the set temperature at any time, press the key, the set temperature will temporarily
flash in the display for 5 seconds. Then the display shows the current inner temperature again.
Setting the Humidity Control
Humidity level can be kept automatically for models with humidity pump.
Press the until the humidity display is flashing. Now you can use the and key to choose
the relative humidity setting from 50% to 80% and 00%. The set humidity will temporarily flash
in the display for 5 seconds. Then the display shows the current inner humidity again. The
humidity preset at the factory is 70% (ideal wine storage humidity).
When 00% is selected, the humidity pump will be switched off. The humidity pump increases
the energy consumption of the unit. If the function is not necessary, please switch it off. The
rated energy consumption is based on the function is switched off.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit remembers the previous
temperature settings. When the power is recovered, the cabinet temperature will go back the same
setting temperature as before the power interruption.

TEMPERATURE ALARM

An audible alarm will sound if the temperature in one of the zones rises or falls outside the temperature
range. The relevant temperature display will flash at the same time. The temperature the appliance is set
at determines the temperature the appliance recognizes as being too warm or too cool. The audible
alarm will sound and the display will & flash:
- When you switch the appliance on, if the temperature inside the appliance is very different from the
temperature set.
- When there has been a lengthy interruption to the power supply.
- When too many items have been put into the unit at one time. Or too much ambient air flowed in when
rearranging and removing storage items.
- When the door is not been closed tightly.
- The appliance is faulty.
The audible alarm will be automatically silenced and the temperature display stops flashing when the set
temperature is reached again. However, if the noise disturbs you, you can switch the audible alarm off
before this if you wish by pressing the POWER key once. The alarm will stop. The relevant temperature
68