Sauder 412913 Manual Del Usuario página 8

5 5
SHELF ATTACHMENT
1. Place the SHELF (A) onto the CLEATS making sure it is tight against all walls and units.
2. Drill six 1/4" holes into the SHELF directly above the cleats. The center of the holes must be 1/2" from the edge of the SHELF and
1" away from the end of the CLEATS. While drilling each hole, touch the tip of the drill bit to the top edge of the cleat to mark the
CLEAT for the 1/8" hole.
3. Remove the SHELF and drill a 1/8" hole on the mark in the CLEATS.
4. Place the SHELF on the CLEATS and fasten it to the CLEATS. Use six BLACK 1-1/2" FLAT HEAD SCREWS (D).
Repeat this step for the other SHELF.
NOTE: Please read the back pages of the instruction booklet for important safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Page 8
All manuals and user guides at all-guides.com
The 1/4" holes in theSHELF must
be 1/2" away from the edge.
1"
The 1/8" holes in the
CLEATS must be at least
1" away from the end.
BROWN 1-1/2" FLAT HEAD SCREW
www.sauder.com/services
30 lbs.
A
1"
D
(12 used for the SHELVES)
412913