Intended Use; Safety Informations - BGS technic 1775 Guia De Inicio Rapido

VW / Audi / Skoda / Seat / Ford / Opel / Saab
TOOLS
1 Camshaft locking tool
2 Locking tool for right camshaft
3 Camshaft locking tool
4 Camshaft locking tool
5 Crankshaft sprocket locking tool
6 Locking tool for left camshaft
7 Flywheel locking tool
8 Flywheel locking tool

INTENDED USE

This tool set is used for checking and adjusting the engine timing on engines from VW / Audi / Skoda /
Seat / Ford / Opel / Saab (see assignment list on last page).
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working when the engine is running. Loose clothing, tools and other objects
can be caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use timing tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on camshaft or crankshaft pulleys. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
1
Engine Timing Tool Set for
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 1775
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed