geberit 116-070-00-1 Manual De Operación página 7

Clean or replace the spray
head
Clean the cover and nozzle of the spray
head with a mild, liquid cleaning agent at
least once a year. Descale the nozzle with a
commercially available descaling agent if
necessary. Replace the nozzle if it can no
longer be completely cleaned and descaled.
See illustration sequence in the
appendix.
1
Close the central water supply valve.
2
Remove the cover and nozzle.
3
Clean the nozzle and rinse with water,
or replace the nozzle (art. no.
243.333.00.1).
4
Install the nozzle and cover.
5
Open the central water supply valve.
B1246-001 © 01-2016
966.926.00.0 (00)
Replace the trap
For hygiene reasons, replace the trap at
least once a year.
Prerequisite
Cleaning mode is activated.
See illustration sequence in the
appendix.
1
Remove the trap.
2
Replace the trap and cover (art. no.
243.312.00.1 and 243.314.00.1).
3
Install the trap.
EN
7