Publicidad
Step 13
The tabs should insert freely into the
1
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
D30
M
Groove
Insert the DRAWER SIDES (D30 and D31) at
å
an angle into the slot at each end of the
DRAWER FRONT (M).
3
Minimum
190 degrees
Q
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (Q) to the DRAWER
å
FRONT (M). Tighten one HIDDEN CAM.
Page 18
D31
Maximum
Arrow
210 degrees
M
VIEW THE T-LOCK BOX VIDEO
With the palm of your hand, tap the
2
DRAWER BOTTOM down into the groove.
D733
U N
F I N
D30
M
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D733) into the grooves
å
in the DRAWER SIDES (D30 and D31) and
DRAWER FRONT (M).
4
D30
Q
Fasten the DRAWER BACK (D68) to the DRAWER
å
SIDES (D30 and D31) and DRAWER BRACE (Q). Use five
BLACK 1-9/16" FLAT HEAD SCREWS. (30S). Repeat this
step for the other DRAWERS.
415520
I S H
E D
D31
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(30 used in this step)
D68
D31
www.sauder.com/services
Publicidad
