Publicidad
Step 17
To make adjustments to the drawers, loosen SCREW #3 in the SLIDES a 1/4 turn, then turn the CAM clockwise or counter-
å
clockwise. Notice how the drawer raises or lowers as you turn the CAM. The higher the screw in the oblong hole, the
higher your drawer front will be. The lower the screw, the lower the drawer front. By adjusting the drawers this way, it will
help the DRAWER FRONTS line up better when closed. Tighten the SCREW when fi nished with adjustments.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
The higher the screw in the oblong hole, the
higher your drawer front will be. The lower
the screw, the lower the drawer front.
Page 22
Loosen screw #3 a 1/4 turn, turn the cam a 1/4 turn maximum
in both the clockwise and counter-clockwise directions to
make adjustments, and then tighten screw #3.
3
2
Cam
415520
www.sauder.com/services
Publicidad
