Step 14
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D30 and D31).
å
Fasten a DRAWER RIGHT (35GC) to the DRAWER RIGHT SIDE (D30) and a DRAWER LEFT (35GD) to the
å
DRAWER LEFT SIDE (D31). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Repeat this step for the other DRAWERS.
å
2
3
GOLD 5/16" FLAT HEAD SCREW
(24 used in this step)
www.sauder.com/services
Roller end
1
D31
M
3S
10A
415520
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
(12 used)
Roller end
D30
1
2
3
Page 19