Worx WG891E Manual Del Usuario página 10

reduce the risk of serious personal injury.
5. Always wear hearing protection
during extended periods of operation.
Following this rule will reduce the risk of
serious personal injury.
6. Keep your hands away from cutting
area. Do not reach under the material
being cut because the nearness of the
blade to your hand is hidden from your
sight.
7. Do not use dull or damaged blades.
Bent blades can break easily, or cause
kickback.
8. Always check walls, floors and ceilings to
avoid hidden power cables and pipes.
9. After long working period, external metal
parts and accessories could be hot.
10. Only withdraw the blade from the cut when
the blade has been stopped moving.
11. The pivoting blade foot must be held firmly
against the material being cut to reduce
saw vibration, blade jumping and blade
breakage.
12. Before cutting, check the cutting line is free
of nails, screws, wire,etc.
10 10
13. Never stop the cutting blade by applying
side pressure to the blade.
14. Remove the battery pack from the saw
before carrying out adjustments.
15. Do not incinerate or burn the battery pack,
it may explode.
16. Do not charge a damaged battery pack.
17. Do not charge non-rechargeable batteries.
18. Battery pack and charger will be warm
during charging, this is normal.
19. Always remove the battery pack from the
charger immediately after re-charging is
completed.
20. Do not dispose of batteries. Return
exhausted batteries to your local collection
or recycling point.
wARNINg: Some dust particles
created by the sawing, contain
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement
and other masonry products.
Cordless Li-ion handy saw
All manuals and user guides at all-guides.com
• Arsenic and chromium from chemically
treated lumber.
your risk from these exposures varies,
depending upon how often you do this
type of work. To reduce your exposure
to these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment,
such as those dust masks that are specially
designed to filter microscopic particles.
EN