Emerson KAILUA COVE CF380SW00 Manual Del Propietário página 13

5. How to Wire Your Ceiling Fan
5.3
Securely connect the fan motor black wire and blue wire to
the supply black (hot) wire using wire connector (supplied)
(Figure 21).
5.4
After connections have been made, turn leads upward and
carefully push leads into the outlet box, with the white and
green leads on one side of the outlet box and position the
black/black/blue lead on the other side of the outlet box
(Figure 22).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
5.5
Screw the two threaded studs (supplied) into the tapped
holes in the hanger bracket (Figure 23).
All manuals and user guides at all-guides.com
13
(Continued)
Figure 21
GREEN
WIRES
WHITE WIRES
Figure 22
THREADED
STUDS (2)
Figure 23
Please contact 1-800-654-3545 for further assistance
SUPPLY BLACK
(HOT)
LISTED WIRE
CONNECTOR
FAN MOTOR
BLACK WIRE
FAN MOTOR BLUE WIRE
BLACK/BLACK/
BLUE WIRES
emersonfans.com
U.L. Model No.: CF380