Troubleshooting - Ferroli BLUEHELIX MAXIMA Instrucciones De Uso, Instalación Y Mantenimiento

BLUEHELIX MAXIMA

3.4 Troubleshooting

Diagnostics
During operation, the unit can generate two types of faults:
Type F They indicate the presence of a temporary fault. They are not indicated, but are recorded in the Service Menu
faults history. If a type F fault is not resolved independently according to specific safety criteria, it becomes a
type A fault.
Type A They indicate the presence of a blocking fault that requires user intervention to be resolved. They are indicated
by lighting up of the red LEDs, the appearance of a specific window on the screen, and by the presence of a
red dot on the main menu icon.
Unblocking the boiler with type A fault in progress
When a type A fault is present, the boiler can be unblocked in two ways:
Touching [RESET] when a screen similar to that shown in fig. 34 appears.
1 -
Touching the main menu icon and then [Boiler Reset] when a screen similar to that shown in fig. 35 (main
2 -
menu icon with red dot) appears.
1
CONNECTED
1.2 1.2
Anomalia bloccante
32.5°
14:09 01 Mar 2020
A01 / Mancata accensione del bruciatore
RESET
28.5° 28.5°
fig. 34
EN
01 Mar 2020 14:36
Bar Bar
ON
NASCONDI
ON ON
cod. 3541U630 - Rev. 00 - 07/2020
2
CONNECTED 27 Mar 2020 14:36
1.2
Bar
CONNECTED
Storico anomalie
32.5°
Blocca schermo
ON
Lingua
Display
LED
28.5°
Data e ora
ON
Diagnostica impianto
Reset Caldaia
Menu Service
fig. 35
Jul 29 2020 14:36
Impostazioni
2
215