Explanation Of Symbols On The Machine - GGP ITALY P680 Manual De Instrucciones

EN 4

2. Explanation of Symbols on the Machine

WARNING!
!
For safe operation and
maintenance, symbols are carved in relief on
the machine.
According to these indications, please be
careful not to make any mistake.
The port to refuel "MIX GASO-
LINE"
Position: Fuel cap
The port to top up chain oil
Position: Oil cap
Setting the switch to the "I" posi-
tion, the engine starts.
Setting the switch to the "O" posi-
tion, the engine stops immediate-
ly.
Position: Rear-left of the unit
All manuals and user guides at all-guides.com
2. Explanation of Symbols on the Machine
If you pull out the choke knob,
you can set the choke as a cold
start mode.
Position: Upper-right of the air-
cleaner cover
The screw under the "H" stamp is
The High-speed
screw.
The screw under the "L" stamp is
The Slow-speed
screw.
The screw at the left of the "T"
stamp is the Idle adjustment
screw.
Position: Left side of the rear
handle
adjustment
adjustment