Troubleshooting Guide; Specifications - GGP ITALY P680 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 66
EN 16

9. Troubleshooting Guide

PROBLEME
CAUSE
1) Starting failure
– Check fuel for water or substandard
WARNING
Make sure the
– Check for engine flooding.
icing prevention
system is not
working.
– Check spark ignition.
2) Lack of
– Check fuel for water or substandard
power/Poor accel-
eration/Rough
idling
– Check air filter and fuel filter for
– Check carburetor for inadequate
3) Oil does not
– Check oil for substandard quality.
come out
– Check oil passage and ports for

10. Specifications

Power unit:
3
Displacement (cm
): ..................................... 62.0
Fuel: .............. Mixture (gasoline, 50; Two-cycle
oil 1)
3
Fuel tank capacity (cm
Chain oil: ....................... Motor oil SAE# 10W-30
3
Oil tank capacity (cm
):................................. 350
Carburetor: .............................. Walbro HDA type
Ignition system: .......................... Pointless (CDl)
Spark plug: ........................... Champion RCJ-7Y
Oil feeding system: ...... Automatic pump with
Sprocket (Teeth x Pitch): .................. 7T x 0.325"
Dimensions (L x W x H) (mm): .. 415 x 260 x 290
Dry weight, Power unit only (kg):................... 5.5
All manuals and user guides at all-guides.com
mixture.
mixture.
clogging.
adjustment.
clogging.
): .............................. 670
adjuster
9. Troubleshooting Guide / 10. Specifications
REMEDY
– Replace with proper fuel.
– Remove and dry the spark plug.
– Then pull the starter again with no
choke.
– Replace with a new plug.
– Replace with proper fuel.
– Clean.
– Readjust speed needles.
– Replace.
– Clean.
If the unit seems to need further serv-
ice, please consult with an authorized
service shop in your area.
Cutting head:
Guide bar Type: .......................... Sprocket nose
Size (in. (mm): .....16 (400), 18 (450), 20 (500), 24
(600)
Chain saw:
Pitch (in. (mm)): ................................ 0.375 (9.38)
Gauge (in. (mm)): ............................. 0.058 (1.27)
Power (kW/min-1) ............................. 3.03/9,500
Max speed (min-1) .................................. 13,000
Idle speed (min-1) ...................................... 2,500
Specifications are subject to change without
notice.

Publicidad

Tabla de contenido
loading

Tabla de contenido