Troubleshooting - Vornado ALCHEMY VFANPA Manual De Instrucciones

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE AND SOLUTION
UNIT FAILS TO
Unit is not plugged in. Plug Power Cord into electrical outlet.
POWER ON
Ensure unit fan speed setting is selected.
Plug fuse has blown. Replace fuse. See user servicing instructions under important instructions.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet or contact a qualified electrician.
Unit set to a low speed setting. Adjust to a higher speed setting.
AIRFLOW IS
WEAK OR
Airflow is blocked. Remove obstruction.
SLOW
Adjust direction of airflow towards the user.
GFCI HAS Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip when the user is changing speeds on a
Vornado circulator. In this event, change to an outlet that is not connected to a GFCI device. It could also indicate a weak or defective GFCI outlet.
TRIPPED
Contact a qualified electrician to check the GFCI outlet.
English
13