Bresser MyTime Travel Instrucciones De Uso página 17

Ocultar thumbs Ver también para MyTime Travel:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

2. Install 2 batteries (AAA size 1.5V) strictly according
to the polarities shown.
3. Reinsert the battery compartment door.
Low battery warning
When it is time to replace the batteries, the respective
low battery indicator
time display (batteries for main unit) or near to the
outdoor temperature (batteries for remote sensor).
USING TABLE STAND OR WALL MOUNTING
The main unit has a foldable table stand which can
support the unit on a flat surface. The remote unit also
can be placed on a flat surface or mounted on a wall
using the recessed screw hole.
OPERATION
Receiving measurements and time signal
Once batteries are placed in the remote unit, it will start
transmitting temperature readings at roughly 45 second
intervals. As soon as batteries are installed in the main
unit it will start searching for a signal from the remote
sensor for about 3 minutes. Upon successful reception
of the signal, the outdoor temperature will be displayed
All manuals and user guides at all-guides.com
will be shown near to the
on the main unit. The main unit will automatically update
its readings at about 45 second intervals.
Subsequently, the main unit will attempt to receive the
DCF77 radio signal. The reception symbol flashes.
When the time signal is received after 3-5 minutes,
the current time and date appear in the display. The
reception symbol will now be shown permanently in the
display. Date and time are automatically updated daily at
2:05 o'clock (CET) by the main unit.
Temperature and humidity
1. Press the DOWN button to switch the displayed
temperature between °C and °F.
2. Once the battery is installed, the main unit will start
displaying the interior measurement information.
The main unit will display the information from the
remote sensor for the first time approximately 3
minutes after the power supply was established.
3. There are 3 different icons to displaying the indoor
climate as below:
humidity is same or lower than 40%
humidity is same or higher than 70%
DE
GB
FR
IT
ES
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

70-00002

Tabla de contenido