Stiga ZERO TURN MOWER Serie Uso Y Mantenimiento página 24

7
6
1
1. Rear Trunnion
2. PTO Belt
3. Mower Deck
4. Drag Link
5. Front Trunnion
6. Lift Arms
7. Nuts
LEVELING AND ADJUSTING
PITCH OF MOWER DECK
Pitch is the difference in blade height from
front to back or from side to side.
Adjust on a level surface with the tires inflated
to the correct air pressure. See Specifications
on page 32.
Three measurements are required to level
and adjust the pitch of the mower deck:
1. The distance from the mower blades to
the ground.
2. The forward pitch of the mower blades.
3. The side-to-side pitch of the mower
blades.
The Distance From The Mower
Blades To The Ground
(Figure 11)
• In the lowest cutting position should be
3.175 cm ± .635 cm (1 1/2" ± 1/4").
• In the highest cutting position should
be 10.795 cm ± .635 cm (4 1/2" ±
1/4").
3
Figure 10
Lowest Cutting Position
3
3.175 cm ± .635 cm (1 1/2" ± 1/4").
Highest Cutting Position
3
10.795 cm ± .635 cm (4 1/2" ± 1/4")
1. Mower Deck
2. Mower Blade
3. Ground
EN - 22
2 5
7
1
1
Figure 11
6
4
2
2