Maintenance And Cleaning - Zanussi ZHC4284 Manual Del Usuario

Ocultar thumbs Ver también para ZHC4284:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before carrying out any maintenance or clean-
ing isolate the cooker hood from the mains
supply.
The cooker hood must be kept clean, as a build
up of grease or fat can be a fire hazard.
External Cleaning
Wipe the cooker hood frequently with warm
soapy water using a mild detergent.
Never use scouring pads or abrasive cleaners.
Never use excessive amounts of water when
cleaning particularly around the control panel.
Metal Grease Filters
The filters are washable and must be cleaned when the
Led S1 lights up or at least every 2 months of opera-
tion, or more frequently for particularly heavy usage.
Remove the metal grease filters
one at a time by:
• Pull the Comfort Panel to open it.
• Releasing the catches on the filters, the filters can
be removed.
The metal grease filters should be washed, by
hand, in mild soapy water or in a dishwasher. Allow
to dry completely before replacing.
Alarm signal reset
Switch off the lights and extractor motor.
Press Button T3 for at least 3 seconds, until
the leds start to flash.
GB

MAINTENANCE AND CLEANING

7

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido