Control Panel - Zanussi ZHC4284 Manual Del Usuario

Ocultar thumbs Ver también para ZHC4284:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam.
The appliance can be installed to recirculate or extract contaminated air.

Control Panel

The hood can be switched on pushing directly onto the requested speed without firstly having to select 0/1 but-
ton.
KEY
LED
L
0/1 Light
T1
0/1 Motor
on
T2
Speed
on
T3
Speed
on
T4
Speed
Fixed
Flashing
S1
Led
Fixed
Flashing
GB
OPERATING INSTRUCTIONS
��
FUNCTIONS
Turns lighting on and off.
First speed.
When pressed for about 1 seconds the motor is switched off.
Second speed.
Third speed.
Max. speed
Intensive speed.
Suitable for the strongest cooking vapours and odours. The function
becomes active when the button is pushed for about 2 seconds. After
10 minutes of functioning it turns off automatically. This function can be
interrupted by means of pressing any of the buttons.
Indicates that the Metal grease filters saturation alarm has been triggered,
and the filters need to be washed. The alarm is triggered after 100 working
hours. (Reset; check the Maintenance-paragraph)
indicates that the activated charcoal odour filter saturation alarm has been
triggered, and the filter has to be replaced; the metal grease filters must
also be washed. The activated charcoal odour filter is triggered after 200
working hours. (Activation and Reset; check the Maintenance-paragraph)
��
��
��
��
5

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido