Makita BCL180 Manual De Instrucciones página 9

Aspiradora inalámbrica
Ocultar thumbs Ver también para BCL180:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

From time to time wipe off the outside
(cleaner body) of the cleaner using a cloth
dampened in soapy water.
Clean out also the suction opening, dust
bag/dust pack mounting area and the dust
stopper.
CAUTION:
Never use gasoline, benzine, thinner,
alcohol
or
deformation or cracks may result.
010009
Symptom
Weak suction power
Not working
010051
NOTE:
Do not attempt to repair cleaner by
yourself.
To
maintain
product
RELIABILITY,
maintenance or adjustment should be
performed by Makita Authorized or Factory
Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
These accessories or attachments are
recommended for use with your Makita
tool specified in this manual. The use of
any other accessories or attachments
the
like.
Discoloration,
Area to be investigated
Is capsule full of dust?
Is filter clogged?
Is battery exhausted?
Is battery exhausted?
SAFETY
repairs,
any
Wash the filter in soapy water when it is
clogged with dust and the cleaner power
becomes small. Dry it out thoroughly before
use. An insufficiently dried filter may cause
poor suction and shorten the service life of
the motor.
Do not blow dust stlicking on the cleaner by
air duster. It brings dust into the housing and
causes failure.
Things to Check Before Asking for
Repairs
might present a risk of injury to persons.
Only use accessory or attachment for its
stated purpose.
If you need any assistance for more details
and
regarding these accessories, ask your local
other
Makita Service Center.
Extension wand (Straight pipe)
Nozzle
Nozzle for carpet
Shelf brush
Corner nozzle
Round brush
Flexible hose
Filter
Prefilter
Various type of Makita genuine batteries
and chargers
9
Fixing method
Empty dust from capsule.
Dust down or wash filter.
Recharge battery.
Recharge battery.

Publicidad

Tabla de contenido
loading

Tabla de contenido