Wiseup GL1600 Guia Del Usuario página 4

4.2. Insert the card reader into a proper PC computer USB port.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the"DCIM" folder.
V. Setting Time/Date Stamp
5.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
5.2. Insert the card reader into a proper PC computer USB port.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create afile
named "SETCLK.txt".
5.5. Write the current date and time in the"SETCLK.txt" file with the correct format:
YYYY,MM,DD,HH,MM,SS FT(For example: 2016,04,12,14,24,32 FT).
5.6. F stands for 1920x 1080P, H for 1280x720P and D for 720x480. If you want the
camera to record at a lower resolution, you can change "F" into "H" or "D" in the
"SETCLK.txt" file. If you don't need time and date stamp on the video footage,
change"T" into "N" in the "SETCLK.txt" file(For example: 2016,04,12,14,24,32
HN).Save this file.
5.7. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Power off the camera, connect it to an outlet AC power supply using the USB
cable and DC5V power adapter provided.
6.2. The red indicator light will keep flashing during the charging process.
6.3. It will take about 2 hours to obtain a full charge.
6.4. The blue indicator light will be illuminated when the camera is fully charged.
VII. Resetting
If for any reason, the camera stops responding or isn't working properly, a quick
reset will restore it back to normal operation.
Operation: When the camera is powered on, use a pin to press the Reset Button
once, the camera will shut down automatically. Then you can restart the camera to
the factory default settings and try it again.