Audio Recording - Wiseup GL1600 Guia Del Usuario

indicator light will keep flashing quickly for 5 seconds and turn off.
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. The red
indicator light will be on for 3 seconds then the blue one will keep flashing. The
camera will start video recording automatically. Note that sometimes the red indica-
tor light will remain illuminated longer than 3 seconds if the Micro SD card has not
been recognized by the camera.
3.3.2. Press the Power Button once to stop video recording. The blue indicator light
will stop flashing and stay illuminated, indicating the camera has entered into stand-
by mode.
3.3.3. Press the Mode Button once to make the camera enter into still photograph
mode. The red indicator light will stay illuminated.
3.3.4. Press the Power Button once to take a photo.The red indicator light will flash
once every time you take a photo.

3.4. AUDIO RECORDING

3.4.1. Power on the camera by pressing the Power Button for 2 seconds. The red
indicator light will be on for 3 seconds then the blue one will keep flashing. The
camera will start video recording automatically. Note that sometimes the red indica-
tor light will remain illuminated longer than 3 seconds if the Micro SD card has not
been recognized by the camera.
3.4.2. Press the Power Button once to stop video recording. The blue indicator light
will stop flashing and stay illuminated, indicating the camera has entered into stand-
by mode.
3.4.3. Press the Mode Button twice to make the camera enter into audio recording
mode. Both blue and red indicator lights will stay illuminated.
3.4.4. Press the Power Button once to start audio recording. The blue indicator light
will keep flashing while the red one will stay illuminated.
3.4.5. Press the Power Button once again to stop audio recording. The blue indicator
light will stop flashing and stay illuminated.
[Note]:
1). Audio Format: WAV
2). In standby mode, you can switch to any mode by pressing the Mode Button once.
IV. Video/Image/Audio File Uploads
4.1. Power off the camera, remove the Micro SD card and insert it into a card reader.