Tabla de contenido
Publicidad
Table 5
Applicant
Nihon Cisco Systems
Nihon Cisco Systems
Nihon Cisco Systems
Nihon Cisco Systems
Nihon Cisco Systems
Nihon Cisco Systems
Nihon Cisco Systems
Nihon Cisco Systems
Nihon Cisco Systems
Site Preparation and Safety Information
Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZ 3260) should install,
Note
replace, or service the equipment.
The instructions in this guide warn you about situations that could cause bodily injury. Before
Warning
working on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents.
Preparing Your Site for Installation
To ensure normal system operation, plan your site configuration and prepare your site before installation.
Choosing a Site for Installation
•
•
•
Ensuring Overcurrent Protection
The system relies on the protective devices in the building installation for protection against
short-circuit, overcurrent, and earth (grounding) fault. Ensure that the protective devices in the building
installation are properly rated to protect the system, and that they comply with national and local codes.
Regulatory Compliance and Safety Information for the Cisco 7500 Series Routers
30
JATE Approvals for Port Adapters (Continued)
Install the system in a restricted access area, where access can be gained only by service personnel
through the use of a special tool, lock and key, or other means of security.
Choose a site with a dry, clean, well-ventilated and air-conditioned area.
Choose a site that maintains an ambient temperature of 32 to 104
Model Number
PA-8T-V35
PA-8T-232
PA-4T
PA-4T+
PA-VXA-1TE1-24+
PA-VXA-1TE1-30+
PA-VXB-2TE1
PA-VXB-2TE1+
PA-VXC-2TE1
PA-VXC-2TE1+
Approval Number
N97-K064-0
M96-N218-0
N98-K058-0
N97-K012-0
CD01-0783JP, L01-0254
CD00-0021JP, L00-0011
CD00-0021JP, L00-0011
CD00-0021JP, L00-0011
CD00-0021JP, L00-0011
o
o
F (0 to 40
C).
78-4194-10
Publicidad
Tabla de contenido
