Cisco 7500 Serie Manual Del Usuario

Regulatory Compliance and Safety Information
for the Cisco 7500 Series Routers
Read this document before installing or servicing the following systems:
Cisco 7505
•
• Cisco 7505-MX
Cisco 7507
•
• Cisco 7507-MX
Cisco 7513
•
• Cisco 7513-MX
Cisco 7576
•
Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install,
Note
replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code
if you are in the United States.
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents.
This document contains the following sections:
Translated Safety Warnings, page 2
•
European Directives, page 21
•
Regulatory Standards Compliance, page 23
•
EMC Environmental Conditions for Products Installed in the European Union, page 24
•
EMC Class A Statements/Warnings, page 24
•
Telecom Approvals Listing, page 26
•
Site Preparation and Safety Information, page 30
•
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2003 Cisco Systems, Inc. All rights reserved.