Publicidad
STEP 1
If your application is for a base
cabinet skip to Step 2. For tall
pantry applications, first verify
your pantry's vertical space to
ensure a proper fit. See Fig.
1.1 for the required minimum
vertical measurement. Remove
top (2) screws of the lower
upright, insert the matching
upper upright and re-attach
screws to secure both uprights
together (See Fig 1.2). Repeat
for other side.
STEP 2
Remove extension plates that
are not being used from the
top of all (4) uprights (See Fig
2.1) and place end caps on the
front (2) uprights only
(See Fig 2.2).
2
FIG.
1.1
REQUIRED
MINIMUM
VERTICAL
SPACE
FIG.
2.1
REMOVE EXTENSION BRACKET
REMOVE SCREWS
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG.
1.2
UPPER UPRIGHT
REMOVE SCREWS,
INSERT THE UPPER
UPRIGHT AND
REATTACH SCREWS
LOWER UPRIGHT
FIG.
2.2
PRESS DOWN FIRMLY
Publicidad
