Publicidad
STEP 10
Insert the button attached
to the rear of the slide into
the back of the upright slot
at desired location. Drop the
front slide button into the
center of the front upright slot
and press down to secure the
slide (See Fig 10).
STEP 11
Drawer preparation: with the
wooden box upside down,
locate the pre-drilled holes at
the front of the box and place
the Blum release levers in each
corner, ensuring they are in
the correct location (See Fig
11.1). Attach levers using (4)
#6 x 1/2" wood screws. Place
wood drawer on top of slides
and slowly push into cabinet
until you hear a "click" sound
(See Fig 11.2). Cycle drawer a
few times to ensure smooth
movement. Repeat this step
for each drawer purchased.
FIG.
10
PRESS DOWN
TO SECURE
PRE-DRILLED HOLE
FIG.
11.1
LOCATIONS
FRONT OF BOX
FIG.
11.2
INSTALLATION INSTRUCTIONS: PILASTER UPRIGHT KIT
SLIDE INTO PLACE
BLUM TRIGGERS
PUSH UNTIL YOU HEAR
A CLICKING SOUND
7
Publicidad
