Publicidad
STEP 6
Add 3/8" (9.5 mm) to
measurement A and record as
C. Mark the distance calculated
from C from the back of the
face frame towards the rear of
the cabinet (See Fig 6). Repeat
on opposite side of the cabinet
face frame. With upright flush
with the bottom of the cabinet
and brackets facing the rear of
cabinet, locate front edge of
upright to the mark and attach
to cabinet using (4)
#8 x 3/4" deep thread screws
per upright.
NOTE: Confirm your upright
is straight and plumb to
the cabinet floor before
attachment. Repeat for
opposite side.
C) A + 3/8" (9.5 mm) =
STEP 7
Using measurement B from
Step 5, measure from the front
of the upright towards the
rear of the cabinet and mark
distance (See Fig 6). Repeat
for opposite side of cabinet
face frame.
FIG.
6
INSTALLATION INSTRUCTIONS: PILASTER UPRIGHT KIT
SIDE VIEW OF CABINET
C
B
5
Publicidad
