Powerboost Function; Restrictions When Using; How To Activate; To Deactivate - NEFF T4 D 3 Serie Instrucciones De Uso

Powerboost function

The Powerboost function can be used to heat large amounts of
water more quickly than the power level

Restrictions when using

This function may be used for all hotplates, provided that the
other hotplate in the same group is not turned on. (See figure)
Otherwise, the and symbols will flash on the display of the
˜ Š
selected hotplate; then the power level is automatically set
*URXS 




*URXS 

Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

How to program

The hob must be switched on.
Select the required hotplate and power level. Then press the
1.
3 symbol. The ‹‹ indicator lights up in the time program
function display. The x
hotplate.
Set the time using the + or - symbols.
2.
+ symbol: 30 minutes.
- symbol: 10 minutes.

After a few seconds, the cooking time begins to count down.
The shortest cooking time will show on the display.
Once the time has elapsed
The hotplate switches off. A warning signal sounds.
on the hotplate and ‹‹ appears for 10 seconds on the time
program function display. The
Pressing the symbol turns off the indicators and stops the
3
beep.
Changing or cancelling the time
Select the hotplate and press the
Change the cooking time using the + or - symbols, or set
to .
‹‹
Š .
*URXS 
 
 
*URXS 
indicator lights up on the selected

‹
indicator flashes.
x
symbol.
3

How to activate

The hob must be switched on.
Select the hotplate with the ( ) symbol.
1.
Press the
˜
2.

To deactivate

.
Š
Select the hotplate with the ( ) symbol.
1.
Press the
˜
2.
will return to power level
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Notes
Select a hotplate to check the remaining cooking time.
■
Any cooking time can be programmed for up to 99 minutes.
■

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time can be changed or cancelled for any
hotplate:
Select the hotplate: Press the symbol
lights up. Change the cooking time using the + or - symbols, or
set to .
‹‹

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the symbol
1.
‹‹ appears on the time program function display.
Press the + or - symbol. The basic setting appears.
2.
+ symbol: 10 minutes.
- symbol: 5 minutes.
Set the required time using the + or - symbol.
3.
After a few seconds, the timer will start to count down.
appears
Once the time has elapsed
A warning signal sounds.
function display and the
Press the
3
and the beep stops.
Changing or cancelling the time
Press the symbol
time with the + or - symbols, or set to
symbol. The function has been turned on.
symbol. The letter is no longer displayed and it
˜
. The function will be deactivated.
Š
3
3 until the indicator
‹‹ appears on the time program
S indicator flashes.
symbol. After 10 seconds the indicators go out
until the indicator
3 S
‹‹
until the indicator x
S lights up.
lights up. Change the
.
21