Panel Description - HQ-Power PROMIX502N Manual Del Usuario

• Familiarise yourself with the operation of the device before bringing it into service and do not allow operation by
unqualified individuals. Damage is usually caused by unprofessional operation of the device.
• Do not use spray cleaners to clean the faders and do not clean the device with abrasives or solvents. Use a clean
and damp cloth instead.
• Use the original packaging if the device is to be transported.
• Do not attempt to make adjustments or execute repairs. Consult a qualified technician instead.
• Removing the barcode will void the warranty.
• Use only high-quality cables in order to obtain the highest sound quality.
• You should only use the device for the applications described in this manual. Damage caused by unauthorised
use will automatically void the warranty and may lead to electroshocks, burns or short circuits.
• Connecting devices: put the power switch in the OFF position. Make sure the devices in question are also OFF.
Place the master control in the minimum position.
4. Features
• 10 stereo channels on 5 fader channels
• 2 phono and 8 CD/line inputs
• 3 mono inputs
• 1 DJ MIC channel with talk-over function and tone controls (HI/LO)
• 2 master outputs (one balanced master output)
• L/R balance control on each master output
• 3-band EQ master tone control
• headphones level control
5. Installation and Operation
Connect all the stereo inputs first and then the microphones and headphones. Make sure all faders are placed at
their minimum position ("0"). Connect the stereo outputs to the power amplifier and/or tape decks. Plug the mixer into
an AC mains socket.
Use shielded low-capacitance stereo cables for the RCA connections. The cable quality is essential for a high-quality
sound reproduction.

6. Panel Description

PROMIX502N
All manuals and user guides at all-guides.com
3 HQPOWER