Changing Location; Technical Data; Sct 815 Overview - Bosch SCT 815 Manual Original

5.4 Checking the screws (semi-annually)
 Check the screws on the line laser mount
(2)
base plate for a tightening torque of 4 Nm.
1 1
2 2
---
5.5 Check and calibrate laser rangefinder
The test and calibration steps are described in
the operating manual of the laser rangefinder.
---
 Check laser rangefinder for accuracy before each front
wheel calibration.
— Checking accuracy and calibrating the grade meas‐
urement.
— Accuracy check of the distance measurement.
— Checking accuracy and calibrating the target indica‐
tor (crosshairs).
---
6. Decommissioning
6.1 ---Separator---

Changing location

 If the SCT 815 is passed on, all the documentation in‐
cluded in the scope of delivery must be handed over
together with the unit.
 The SCT 815 is only ever to be transported in the
original or equivalent packaging.
 Heed the notes on initial commissioning.
---Separator---
6.2 Disposal
 Dismantle the SCT 815 and sort out and dispose of
the different materials in accordance with the applica‐
ble regulations.
---Separator---
7.

Technical data

---Separator---
7.1 SCT 815 specifications
Property
Height x width x depth dimensions
Weight
---Separator---
Robert Bosch GmbH
(1)
and the
Specification
1230 mm x 600 mm
x 510 mm
11.9 kg
SCT 815 | 23 | en
1 689 989 475 | 2020-05-01