Bosch SCT 815 Manual Original página 13

1 User instructions... ......................................
1.1 Symbols used in the
1.2 Warnings in the documentation... .................
1.3 Target group... ...............................................
1.4 Warranty and liability... .................................
1.5 Safety Notes... ...............................................
1.6 Other applicable documents... ......................
2 Product description... ..................................
2.1 Intended use... ..............................................
2.2 Scope of delivery... .......................................
2.3 SCT 815 overview... ......................................
2.4 Prerequisites... ..............................................
2.5 Laser range finder GLM 120
2.6 Functional description... ...............................
3 Initial commissioning... ................................
3.1 SCT 815 installation... ...................................
3.2 Checking the accuracy of the inclination meas‐
urement (before each
4 Operation... ..................................................
4.1 Positioning SCT 815 for radar sensor calibra‐
tion... .............................................................
4.2 Attaching the line laser to SCT
4.3 Adjusting the distance between SCT 815 and
the vehicle... ..................................................
4.4 Aligning SCT 815 with the vehicle's longitudi‐
nal center plane... .........................................
4.5 Adjusting the height of the prismatic reflec‐
tor... ..............................................................
4.5.1 Adjusting the height of the prismatic reflector
according to the millimeter... ........................
4.5.2 Adjusting the height of the prismatic reflector
using the manufacturer's badge or the front ra‐
dar sensor... ..................................................
4.6 Setting the offset (up to 25 cm) from the vehi‐
cle's longitudinal center
4.7 Setting the offset (25 cm and above) from the
vehicle's longitudinal center
5 Maintenance... ..............................................
5.1 Cleaning... .....................................................
5.2 Spare parts... ................................................
5.3 Changing the positioning
5.4 Checking the screws
5.5 Check and calibrate laser
6 Decommissioning... ......................................
6.1 Changing location... ......................................
6.2 Disposal... .....................................................
7 Technical data... ...........................................
7.1 SCT 815 specifications... ..............................
Robert Bosch GmbH
13
documentation... ......... 13
13
13
13
14
14
14
14
14
14
14
C... ................... 15
15
15
15
calibration)... ............. 16
17
17
815... ........... 17
17
18
19
19
20
plane... ................... 21
plane... ............. 22
22
22
22
foot... .................... 22
(semi-annually)... ......... 23
rangefinder... ....... 23
23
23
23
23
23
1. User instructions
---Separator--- 1.1 Symbols used in the documentation
Warning of possible physical damage to the
component or product or of environmental
pollution.
---Separator---
Practical hints, recommendation or reference
to other information.
---Separator---
Warning of danger for the operator during
subsequent procedures.
---Separator---
Single-step procedure.
---Separator---
Optional step.
---Separator---
Result of a procedure.
---Separator---
Reference to a figure. Example:
means figure 12, item 2.
---Separator---
Reference to a page.
---Separator---
1.2 Warnings in the documentation
Warning notices warn of dangers to the user or people
in the vicinity. Warnings also indicate the type, source
and consequences of the danger as well as preventive
action.
Warning notices have the following structure:
Signal word
Warning Type, source and consequences of the
symbol danger.
 Actions and instructions to prevent the
danger.
The signal word indicates the likelihood of occurrence
and the severity of the danger in the event of non-ob‐
servance:
Signal word Likelihood of occur‐
rence
DANGER Immediate threat of
danger
WARNING Possible impending
danger
CAUTION Possible dangerous sit‐
uation
---Separator---
1.3 Target group
The product may only be used by trained and instruc‐
ted personnel. Apprentices or personnel undergoing
training or instruction may use the product only under
the continual supervision of an experienced person.
Children must be supervised to ensure that they do not
play with the product.
---Separator---
1.4 Warranty and liability
No modifications may be carried out on our products.
Our products may only be used with genuine accesso‐
ries and genuine spare parts. Otherwise, all warranty
claims will be rendered null and void.
---Separator---
SCT 815 | 13 | en
12(2)
Severity of danger with
non-observance
Death or severe injury
Death or severe injury
Minor injury
1 689 989 475 | 2020-05-01