Troubleshooting - Angelcare AC1120 Manual Del Propietário

TROUBLEShOOTiNG

NO SOUND iS BEiNG TRANSMiTTED
• Bring Parent Unit closer to Nursery Unit.
• Check/replace batteries or recharge Parent Unit.
• Check connections or change to another electrical outlet.
• Ensure both units are ON. Ensure mains supply units are activated.
• Check on the top bar of the Parent Unit to see if the Monitor is on "MUTE" instead
of "ON". Refer to step 5.9.
NURSERY UNiT POWER ON iNDiCATOR (GREEN LiGhT) DOES NOT LiGhT UP
• Check connections or change to another electrical outlet.
• Push and hold the left 'wing' for 2 seconds to turn the Nursery Unit ON.
WEAK RECEPTiON
• Bring units closer together.
• Change the position of one or both units.
• Place units on a flat surface away from baby's reach.
• Replace the batteries or recharge Parent Unit.
STATiC, DiSTORTiON, iNTERFERENCES
(FROM OThER MONiTORS, WiRELESS PhONES, WALKiE-TALKiES, ETC...)
• Rotate Parent Unit or move it away from source of interference.
FEEDBACK (LOUD NOiSES EMiTTED FROM ThE PARENT UNiT)
• Move units farther apart (at least 3 meters/10 feet apart).
• Decrease volume on Parent Unit.
ThE PARENT UNiT SCREEN iS BLACK (PARENT UNiT iS OFF)
• Turn the Parent Unit back ON by pushing and holding the power button (left 'wing')
for 2 seconds.
• Replace the batteries or recharge Parent Unit.
If you experience a problem that is not noted in this manual,
please do not return the product to the store. If you are not completely satisfied or
have any questions:
United States and Canada: please contact us at: angelcare@cdecinc.ca
Other countries: please contact your local Distributor.
We may have a simple solution to your problem.
E
N
19