Creative Outlier Manual Del Usuario página 9

All manuals and user guides at all-guides.com
Button
3.
Press to change to the next or previous
Next, Forward
track. Press and hold to scroll forward or
/ Previous,
backward a track (device dependent).
Backward
/
4.
Slide switch to enable playback from
Mode Selector
either
( ), stored tracks in microSD media
(microSD Audio) or tracks from a USB
connected computer (USB Audio).
Light Indicator
5.
Right earcup Blue and blinks rapidly: in pairing mode
and is ready to pair with a new device.
indicator
Blue and blinks moderately:
automatically searching and attempts to
connect to the last paired device.
Blue and blinks slowly: connected to a
paired device.
Blue and flashes once: successfully
cleared all paired devices.
Green: in microSD Audio or USB Audio
mode.
Green and flashes twice: selected
microSD Audio / Play All mode.
Green and flashes randomly: selected
microSD Audio / Shuffle mode.
Function
a wireless Bluetooth device
Function
Green and blinks thrice: low battery
level in microSD Audio or USB Audio
mode, charge the headset soonest.
Red and Blue blink alternately: low
battery level in Bluetooth mode, charge
the headset soonest.
Red and flashes once: powering off
the headset.
Red: charging headset. This goes off
when headset is fully charged.
Note: the light indicator may appear as a
combination of above colors and behavior
depending on functionality.
Connector / Port
6.
Insert a TF or microSD memory card
microSD slot
for stored music playback. Press once
to secure the card in the slot and press
again to eject the card.
7.
Use the supplied USB cable for charging
Micro-USB
the headset via a laptop or computer.
charging
Also for USB Audio connection.
connector
8.
Use a stereo audio cable (available
Audio Input
separately) for a wired connection to a
connector
non-wireless device or when battery power
(3.5mm / ⅛")
runs out. In this mode, Bluetooth, microSD
Audio and USB Audio connections will be
disabled.
Function