Dvd Setup; Calling Up The Setup Menu; Performing Settings In The Setup Menu; General Setup - General Settings - Blaupunkt 7 607 276 016 Instrucciones De Manejo

DVD Setup

The setup of the device offers a variety
of options to customise the device.

Calling up the setup menu

To call up the setup menu,
press the SETUP O button on the
remote control.
The display of the CVX 02 shows
"CODE" (protective function against
inadvertent adjustment).
For confirmation, press both rotary/
pushbuttons on the CCU 02 at the
same time until a beep sounds.
The setup menu is displayed on the
external monitor.
Performing settings in the setup
menu
The setup menu is divided into five
sections: General Setup, Audio Setup,
Video Setup, Preference Page and
Password Setup.
@ buttons of the re-
Use the
mote control to select one of the
five areas in the setup menu.
Press the OK ? button on the re-
mote control to confirm your entry.
The selection mark (yellow) is displayed
and positioned on the first entry of the
selected menu.
@ buttons of the re-
Use the
mote control to select the desired
menu item.
Press the OK ? button on the
remote control to confirm your
entries.
@ buttons of the
Use the
remote control to perform your
settings.
Press the OK ? button on the
remote control to confirm your
entries.
If you want to perform additional settings
in other sections of the menu:
@ button on the
Press the
remote control to return to the
selection of menu areas.
To exit the setup menu,
press the SETUP O button on the
remote control.

General Setup - general settings

In the general settings, you can set the
type of connected display.
Selecting the monitor setting
The setting of the monitor is performed
under the "TV DISPLAY" menu item.
The following monitor settings are
available:
Normal/LB: The DVD player is con-
nected to a 4:3 monitor. The wide
image is displayed on the screen at
full width with black bars at the top
and bottom edge of the screen.
DVD SETUP
37