Setting The Timer - Dometic RTX 1000 Manual Del Usuario

Using the parking cooler
If you want to leave the MANUAL mode:
1. Press the button until the
2. Press the button to leave the MANUAL mode.
✔ The BOOST mode is started.
3. Press the button
– one more time to set the ECO mode
– two more times to set the AUTO mode
Remote control
1. Press the button to set the AUTO mode.
2. Press the button to set the ECO mode.
3. Press the button to set the BOOST mode.
4. Press the + button to increase the fan speed manually and to start the
MANUAL mode.
5. Press the – button to decrease the fan speed manually and to start the
MANUAL mode.
6. To to start the selected mode don't press any button for more than 5 s.
7.9

Setting the timer

The parking cooler is fitted with a timer. Once the set time has elapsed in the timer,
the parking cooler automatically switches off.
If the timer is activated, the display alternates between the set temperature and the
duration.
Control panel
1. Press the button until the
2. Press the or
10 minute intervals.
3. Press the button to save the value.
18
symbol is displayed.
symbol appears.
button to set the required running time of the timer in
RTX1000/2000, SPX1200
EN