Gree GMV-ND22PL/B-T Manual Del Propietário página 10

Below are dimensions of A, B, C, etc. for different models:
Model
GMV-ND22~36PL/B-T
GMV-ND40~63PL/B-T
GMV-ND72PL/B-T
4.1.2 Punching of Bolt Spots and Bolt Installation
Punch holes on the installation area according to the 4 spots on the paper pattern; The punching diameter
may refer to the diameter of expansion bolt, about 60mm to 70mm depth, as shown in Fig 4.1.2.
Insert the expansion bolt M10 into the hole and then drive the iron nail into the bolt, as shown in Fig 4.1.3.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Floor and Ceiling Type Indoor Unit
Fig 4.1.1
Item
A B
760 415
1060 415
1360 415
Fig 4.1.2
C D
700 200
1000 200
1300 200
7
Unit: mm
E F
450 474
450 474
450 474