Sony MPC-3610 Manual Del Usuario página 4

000 4
English
Major Functions Updated in
Version 3.0
Added imager modes
The following two new imager modes have been
added.
6K 2.39:1 (when Full Frame License is installed)
5.7K 16:9 (when Full Frame License is installed)
New high image quality profile X-OCN XT
X-OCN XT, which provides higher image quality
than X-OCN ST, is now supported for the X-OCN
recording format.
Added De-Squeeze ratios
When an Anamorphic License is installed,
additional De-Squeeze ratios 1.25×, 1.3×, 1.5×, and
1.8× can now be selected. This can be applied to
SxS recording and VF/Monitor/SDI output (options
available will vary depending on the imager
mode).
Added Cache Rec function
The Cache Rec function can now be selected
during either AXS standalone recording or SxS
standalone recording.
Added AXS Relay Rec function
Relay recording using the two slots on an
AXS-R7 is now supported during AXS standalone
recording.
Added simultaneous recording format
ˎ Simultaneous AXS recording (RAW/X-OCN) and ˎ
4K XAVC-Intra recording to SxS memory is now
supported.
ˎ ProRes 422 Proxy can now be selected in Sub
ˎ
Rec Format at the same time as 4K XAVC-Intra
recording.
Added SxS recording folder structure selection
The name of the root folder for SxS recording can
now be set to the existing "XDROOT" or to
"Cam ID + Reel#" format (same as AXS recording).
47.952 fps support
47.952 fps can now be selected as the project
frame rate for AXS recording in 4K 4:3 and 4K 17:9
modes.
6G/12G SDI output support
4K transfer is now supported using a single SDI
cable by selecting 6G/12G as the 4K SDI output
(47.952 fps not supported).
Improved imaging assist functions
ˎ The false color function can now also be applied ˎ
to the SDI Monitor output. The number of
identification colors has been increased to ten,
and the display levels are now adjustable.
ˎ A Flip function (horizontal invert function) can ˎ
now be selected. The VF/Monitor/SDI output
image and SxS recording image can be flipped.
Network function
ˎ Control from a web browser on a tablet or ˎ
smartphone, similar to using a wired LAN, is
supported by connecting a CBK-WA02 Wireless
LAN Adaptor.
ˎ Configuration of full menu settings from the ˎ
web remote control screen is now supported
(although some items are not configurable).
Improved operations
ˎ When a DVF-EL200 is attached, viewfinder- ˎ
related menus (VF Display and VF Function) are
displayed on the viewfinder screen, and the
corresponding functions can now be configured
using the Menu button and SEL/SET (Enter) dial
of the DVF-EL200.
ˎ The on-screen display (OSD) Status Info and ˎ
Frame Line settings for each output have been
simplified.
Menu operation:
Monitoring > OSD Appearance
Other functions
CDL files (*.cdl) created using external tools can be
imported and applied to the Look.
Major Functions Updated in
Version 2.1
Compatible with QD-G120F and QD-G240F XQD
memory cards
QD-G120F and QD-G240F have been added to
the XQD memory card lineup, which can be used
with the camera. The XQD ExpressCard adapter
(QDA-EX1) is required to use an XQD memory card.
Major Functions Updated in
Version 2.0
Eliminated restrictions on playback function
In Version 1.0, there were restrictions on full-frame
playback. Playback in all imager modes is now
supported.
Added imager modes
The following three new imager modes have been
added.
4K 6:5 Anamorphic (when Anamorphic License is
installed)
6K 1.85:1 (when Full Frame License is installed)
6K 17:9 (when Full Frame License is installed)
New lens mount support
Pro E-mount has been released, adding support
for E-mount lenses.
GB