Trouble Shooting; Fault Correction - Parkside PNTS 1300 D3 Traduccion Del Manual De Instrucciones Originales

G B M T

Trouble shooting

Problem
Device does not start
Low or lack of suction
Float does not switch
the appliance off
Dust or dirt is blow
out of the device
5 2
All manuals and user guides at all-guides.com
Possible cause
Mains voltage is not present
Defective on/off switch
( 3)
Worn carbon brushes
Defective motor
Hose system (
jets ( 18/20) blocked
Suction pipe (
bled incorrectly
Container ( 6) open
Container ( 6) full
Filter ( 15/16/17) full or
clogged
incorrectly positioned (e.g.
due to jerky movements)
( 21) faulty
( 21) does not move
( 21) faulty
Filter ( 15/16/17) is not
or not correctly assembled

Fault correction

Check plug socket, cable, line,
plug and fuse, where appropri-
ate, repair through electrical
specialist
Repair through customer service
13/14) or Remove obstructions and block-
ages
12) assem-
Assemble suction pipe correctly
Close container
Empty container
21)
Switch off the equipment so the
ball drops then switch on again
Repair by Customer Care
Repair by Customer Care