Nokia E72 Manual Del Usuario página 66

If you want to cancel all pairings, select
all.
Receive data using Bluetooth connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
placed in the Inbox folder in Messaging. Messages received
through Bluetooth connectivity are indicated by
Tip: If your device notifies you that the memory is full
when you try to receive data through Bluetooth
connectivity, change memory card as the memory where
the data is stored.
Block devices
Select Menu Ctrl. panel
>
Bluetooth.
To block a device from establishing a Bluetooth
connection to your device, open the
Scroll to a device you want to block, and select
Options > Block.
To unblock a device, open the
to a device, and select
To unblock all blocked devices, select
all.
66
Options
is displayed, and the item is
and Connectivity
>
Paired devices
Blocked devices
Options > Delete.
Options
>
Delete If you reject a pairing request from another device, you are
>
asked if you want to block all future connection requests
from this device. If you accept the query, the remote device
is added to the list of blocked devices.
Remote SIM mode
Before the remote SIM mode can be activated, the two
devices must be paired and the pairing initiated from the
other device. When pairing, use a 16-digit passcode and
.
set the other device as authorized.
To use the remote SIM mode with a compatible car kit
enhancement, activate Bluetooth connectivity and enable
the use of the remote SIM mode with your device.
Activate the remote SIM mode from the other device.
When the remote SIM mode is on in your device,
SIM mode is displayed in the standby mode. The
connection to the wireless network is turned off, as
tab.
indicated by
you cannot use SIM card services or features requiring
cellular network coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
tab, scroll
as a car kit, to make or receive calls. Your wireless device
will not make any calls while in this mode, except to the
emergency numbers programmed into your device. To
Delete
make calls from your device, you must leave the remote
in the signal strength indicator area, and
Remote