CRC SmartWasher SW-23 Manual De Instrucciones página 20

SW-37
PARTS WASHER OPERATION
1. The pump switch is attached to a ten minute timer. Turning the switch "ON" (upward position) will start
fluid flowing for ten minutes. To restart the flow, turn the switch "OFF" then "ON" again and the flow will
restart for another ten minutes.
2. Adjust the valve at the base of the nozzle to control the flow of the fluid through the nozzle. The valve
at the base of the brush hose controls the flow of fluid through the brush. Both outlets can be operated
independently or together.
SmartWasher
BIOREMEDIATING parts washing system
USER INSTRUCTION MANUAL
ORIGINAL INSTRUCTIONS
®
page 20 of 720