CRC SmartWasher SW-23 Manual De Instrucciones página 36

When this light is on, simply add a 20 litre container
of OzzyJuice to bring the fluid level up to normal. On
®
average, with normal use, you will add a 20 liter container
of OzzyJuice approximately every six to eight weeks.
®
How quickly can Ozzy break down oil and
grease?
Once activated, Ozzy and his friends are constantly
eating. Assuming the system is operating optimally
(OzzyJuice temperature between 40°C - 46°C and
®
the OzzyMat routinely changed a minimum of once
®
every 30 days) the rate at which the hydrocarbons
can remediate can approach 80% every seven days.
Analyses performed on samples of used OzzyJuice
operating SmartWasher
and grease levels in the 1,400 parts per million range.
BY COMPARISON, used, non-bioremediating, aqueous
cleaners can average over 20,000 parts per million of
oil and grease.
Does anything kill Ozzy?
YES. Any biocides designed to kill microbes, such as
bleach and Lysol™, will kill Ozzy; chemicals that kill
living things like some strong pesticides and rat poison
may be harmful to Ozzy.
How often, how much and when are you
adding fluid?
A full container of OzzyJuice
immediately when the "Add Fluid" light comes on. The
system is designed to warn users at the point at which
fluid should be added. Please keep in mind that the light
will remain illuminated while fluid is low, and more fluid
SmartWasher
BIOREMEDIATING parts washing system
USER INSTRUCTION MANUAL
systems consistently show oil
®
should be added
®
ORIGINAL INSTRUCTIONS
will be needed to reach the proper operating level. If
the "Add Fluid" light is on, the heating of the cleaning
fluid is switched of. Please note that in this
How many hours a day do you have the pump
running?
The more the pump runs, the more evaporation occurs.
Never leave the pump running when the SmartWasher
is not in use.
How often do I change the OzzyMat
At least once a month. This simple act accomplishes
three things: First, it keeps trapped contaminants from
from reaching inappropriate levels. Secondly, Ozzy microbes
®
are introduced into the SmartWasher system through
the OzzyMat
you introduce fresh Ozzy(s) to the existing microbe
colony which keeps the system working at an optimum
level. Finally, changing the OzzyMat
building up in the base of the unit. If the OzzyMat
changed regularly and allowed to become clogged, large
contaminants can flow into the reservoir via the overflow
holes in the sink, potentially causing sludge to build up.
How do I dispose of the OzzyMat
In many areas the OzzyMat
non-leaching, sealed manner, and disposed of as solid
waste. But it must always be disposed of in accordance
with National Regulations.
What do I do if the OzzyMat
with grease?
The FL-4 OzzyMat
away weekly, which helps eliminate unnecessary clogging.
. Every time you change the OzzyMat
®
®
can be disposed of in a
®
®
has 4 layers intended to be peeled
®
page 36 of 720
®
®
?
®
®
keeps sludge from
is not
®
?
®
clogs up quickly