Hartmann TENSOVAL compact Instrucciones De Uso página 7

the heart symbol and the falling
cuff pressure are displayed. A
beep sounds which is synchron-
ised with your heartbeat.
A beep indicates the end of
measurement. The systolic and
diastolic readings appear simul-
taneously on the display, with the
pulse rate appearing alternately To switch off the device, simply
(see fig.) press the START/STOP button.
Otherwise the device will switch
itself off automatically after 3
minutes.
If you wish to stop measurement
for any reason, simply press the
exhaust button. The measuring
process is interrupted and an
automatic fall in pressure occurs.
8. Maintenance
Do not expose the device to
extreme temperatures, humidity,
The reading is stored automatic-
dust or direct sunlight.
ally. This device consists of high qual-
Deflate the cuff completely by ity precision components. Do not
pressing the exhaust button. drop the device and protect it
against hard knocks.
Never open the device. Repairs
may only be carried out by quali-
fied individuals.
Only use a soft, moistened cloth
12
All manuals and user guides at all-guides.com
to clean the device. Do not use
Exhaust button
detergents or solvents.
The cuff can be cleaned carefully
with a moist cloth and mild, pH-
neutral soap. Do not completely
immerse the cuff in water.
9. Checking the measurement
function
We recommend that measurement
function be checked at intervals of
two years in the case of profession-
al users, such as pharmacies,
medical practices and clinics. You
should also observe the national
11. Error displays
Error which has occurred
Device will not switch on
English
regulations, such as, in Germany,
the Decree on Sales of Medical
Devices (Medizinprodukte-Betreiber-
verordnung). Measurement function
checks can be carried out either by
competent authorities, or authori-
sed maintenance providers for a fee.
10. Warranty
This product comes with a 3-year
warranty. Details of warranty con-
ditions and contact addresses can
be found in the separate warranty
document.
Possible causes
No batteries, they have been inserted
incorrectly or are empty.
The cuff was not inflated enough.
Pump again until a suitably high pressure is
reached.
The cuff was inflated to more than
280 mmHg. Deflate the cuff by pressing the
exhaust button.
13