Sabbath Mode; Baking And Roasting - Whirlpool YWFE975H0HV Manual De Instrucciones

If your model has a Max Capacity Oven Rack, the recessed ends
must be placed in the rack position above the desired position of
the food. See the following illustration.
A. Ends of rack in position 3
B. Food in position 2
IMPORTANT: These rack positions are for flat racks. If a Max
Capacity Oven Rack is used, the rack position must be adjusted
as shown in the previous figure.
Multiple Rack Cooking
2-rack (non-convection): Use rack positions 2 and 5 or 3 and 6.
2-rack (convection): Use rack positions 2 and 5 or 3 and 6.
3-rack (convection): Use rack positions 2 and 7 and a Max
Capacity Oven Rack in rack position 5.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Make sure
that no bakeware piece is directly over another.

Sabbath Mode

Sabbath mode sets the oven to remain on in a bake setting until
turned off.
When Sabbath mode is set, only the Bake cycle will operate. All
other cooking and cleaning cycles are disabled. No tones will
sound and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will not
turn on or off and the heating elements will not turn on or off
immediately.
To Enable Sabbath Mode Capability (One Time Only):
1. Press SETTINGS until "SABBATH" is displayed. "OFF. Press
(1) for On" will scroll in the display.
2. Press 1. "ON. Press (1) for Off" will scroll in the display.
Sabbath mode can be activated for baking.
3. Press the Start or Cancel keypads to exit and display the time
of day.
NOTE: To disable Sabbath mode, repeat steps 1 through 3 to
change the status from "SABBATH ON" to "SABBATH OFF."
To Activate Sabbath Mode:
1. Press BAKE.
2. Press the number keypads to set a temperature other than
350°F (177°C).
3. Press the Start keypad.
For timed cooking in Sabbath mode, press COOK TIME and
then the number keypads to set the desired cook time.
Press the Start keypad.
4. Press SETTINGS. Then press 7. "SAb" will appear in the
display.
To Adjust Temperature (When Sabbath Mode Is Running):
1. Press the number keypad as instructed by the scrolling text to
select the new temperature.
NOTE: The temperature adjustment will not appear on the
display and no tones will sound. The scrolling text will be
shown on the display as it was before the keypad was
pressed.
2. Press the Start keypad.
To Deactivate Sabbath Mode:
Press the Settings keypad and then press 7 to return to regular
baking, or press the Cancel keypad to turn off the range.

Baking and Roasting

Preheating
When beginning a Bake, Convect Bake or Convect Roast cycle,
the oven will begin preheating after Start is pressed. The oven will
take approximately 12 to 15 minutes to reach 350°F (177°C) with
all of the oven racks provided with your oven inside the oven
cavity. Higher temperatures will take longer to preheat. The
preheat cycle rapidly increases the oven temperature. The actual
oven temperature will go above your set temperature to offset the
heat lost when your oven door is opened to insert food. This
ensures that when you place your food in the oven, the oven will
begin at the proper temperature. Insert your food when the
preheat tone sounds. Do not open the door during preheat before
the tone sounds.
Rapid Preheat
Rapid Preheat can be used to shorten the preheating time. Only
one standard flat oven rack should be in the oven during Rapid
Preheat. Extra racks should be removed prior to starting Rapid
Preheat. Press RAPID PREHEAT and follow the oven control
prompts, or, if preheating has already started, simply press RAPID
PREHEAT. The preheating cycle should be completed before
placing food in the oven. When the Rapid Preheat cycle is
complete, the oven starts a normal Bake cycle.
IMPORTANT: Rapid Preheat should be used only for one-rack
baking.
Oven Temperature
While in use, the oven elements will cycle on and off as needed to
maintain a consistent temperature, but they may run slightly hot or
cool at any point in time due to this cycling. Opening the oven door
while in use will release the hot air and cool the oven which could
impact the cooking time and performance. It is recommended to
use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in
the non-convection bake mode to improve oven performance.
Temperature Management System
The Temperature Management System electronically regulates
the oven heat levels during preheat and bake to maintain a
precise temperature range for optimal cooking results. The bake
and broil elements or burners cycle on and off in intervals. On
convection range models, the fan will run while preheating and
may be cycled on and off for short intervals during bake to provide
the best results. This feature is automatically activated when the
oven is in use.
Before baking and roasting, position racks according to the
"Positioning Racks and Bakeware" section. When roasting, it is
not necessary to wait for the oven preheat cycle to end before
putting food in unless it is recommended in the recipe.
8