Tabla de contenido
Publicidad
5 Descripción detallada
5.11.2 &Config ...
5.11.2.1
5.11.2.2
5.11.2.3
5.11.2.4
116
Config.Aux.Language
Config.Aux.Contrast
Config.Aux.Beeper
Config.Aux.DevName
Config.Aux.Prog
Config.Aux.MaxLift
Config.Aux.MonBeak
Basic configuration / miscellaneous
Language:
Selection of dialog language
Contrast:
Display contrast in steps from 0 to 15
Beeper:
Acoustic warning signal on/off
DevName:
Instrument name as identification for connections with
other instruments (8 ASCII characters, no special charac-
ters)
Prog:
Program version ($Q sends "730.0013")
MaxLift:
Max. Lift height i.e. lowest possible lift position
Beaker sensor on/off ∗
MonBeak:
∗
Modifications effect after RESET or power on.
Config.OvenSet.InitTemp
Config.OvenSet.MaxTemp
Config.OvenSet.TempCorr
The initial temperature of the oven control is set on power-up of the unit.
When the maximum temperature is reached, this aborts the running method
and the RS error message E165.
The temperature correction varies the preset temperature for the oven con-
trol, i.e. it also influences the control algorithm.
Config.RackDef.RackNo
Rack number
Config.RackDef.Code
Config.RackDef.Type
Config.RackDef.WorkH
Config.RackDef.RinseH
Config.RackDef.ShiftH
Config.RackDef.SpecialH
Rack definitions. Depending on the current rack number (see 5.11.2.3) the
corresponding one of the 16 possible data sets is overlayed.
Code:
Identification code of the rack, has to be unique.
Type:
Rack type. Valid entries are the names of the position ta-
bles.
WorkH:
Working position of the lift in mm from the upper stop of
the tower.
RinseH:
Rinsing position of the lift in mm from the upper stop of the
tower.
ShiftH:
Shifting position of the lift in mm from the upper stop of the
tower.
SpecialH:
Special position of the lift in mm from the upper stop of the
tower.
english, deutsch, français, español
8 ASCII characters
0...90...100 mm
Off, 50...250
000001b...111111b
8 ASCII characters
774 Oven Sample Processor, Instrucciones para el uso
0...3...7
on, off
read only
on, off
∗
50...275
-10...0...10
1...16
0...100 mm
0...100 mm
0...20 mm
0...100 mm
Publicidad
Tabla de contenido
