Connecting The Ac Power Cord (Mains Lead) - Sony TA-F501 ES Manual De Instrucciones

Notes
• When DIGITAL 1, 2, or 3 is selected, the selected
input signal is output from the DIGITAL 4 OUT
jack. When DIGITAL 4 or analog input is selected,
no signal is output from the DIGITAL 4 OUT jack.
• Only the audio signal of the CD player is output
from the DIGITAL COAXIAL OUT jack.
However, the audio signal of a Super Audio CD
player is not output from the DIGITAL COAXIAL
OUT jack at all.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, and 48 kHz sampling
frequencies.
8
GB
Connecting the AC power
cord (mains lead)
Connect the supplied AC power cord (mains
lead) to the AC IN terminal on the amplifier,
then connect the AC power cord (mains lead)
to the wall outlet.
AC IN terminal
A several space is left between the plug and the
rear panel even when the power cord (mains
lead) is inserted firmly. The cord is supposed
be connected this way. This is not a
malfunction.
To the wall outlet
AC power cord
(mains lead)
(supplied)